Makita Rotary Hammer Machine For Concrete, Steel, Wood, 28mm, 3 Operation Modes, 800W, 3.2kg HR2810
Makita Rotary Hammer Machine For Concrete, Steel, Wood, 28mm, 3 Operation Modes, 800W, 3.2kg HR2810
Inclusive of 15% VAT
The Makita HR2810 is an 800W three-mode combination hammer designed for hammer drilling, drilling and chiselling applications. It uses an SDS-PLUS tool holder and provides up to 28mm drilling capacity in concrete, 13mm in steel and 32mm in wood. The HR2810 operates at 0–1,100rpm with an impact rate of up to 4,500 BPM and features a torque-limiting clutch, variable speed control, reversing and a rubberized ergonomic handle. :contentReference[oaicite:0]{index=0}
- 800W motor: Provides power for demanding drilling and chiselling applications.
- 28mm concrete capacity: Supports drilling up to 28mm in concrete when used with the specified TCT bit.
- Three operating modes: Hammering, hammering with rotation and rotation-only operation.
- SDS-PLUS system: Designed for SDS-PLUS bits with a one-touch sliding chuck for bit changes.
- Variable speed: Provides 0–1,100rpm no-load speed with up to 4,500 impacts per minute.
- Torque limiting clutch: Helps reduce gear damage by disengaging the gears if the bit binds.
Technical Specifications
What’s in the Box
- Side Grip 1 pc
- Depth Gauge 1 pc
Delivery Information
Everything you need to know about dispatch, coverage and B2B ordering before you check out.
Dispatch & transit
Delivery takes 1–2 business days within Dammam and 2–4 business days for all other regions across Saudi Arabia.
Free over 1000 SRCoverage
All 13 regions incl. Riyadh, Jeddah, Dammam, Makkah, Madinah, NEOM & Qiddiya project sites.
Site delivery availableB2B terms
VAT invoice issued on every order. Purchase-order & pay-on-invoice available for approved accounts.
PO accepted
You may also like
Frequently Asked Questions
Answers to common questions about this Product.
The Makita HR2810 is an 800W three-mode combination hammer with SDS-PLUS tooling and a maximum concrete drilling capacity of 28mm. :contentReference[oaicite:1]{index=1}
The HR2810 has an 800W continuous rating input. :contentReference[oaicite:2]{index=2}
The maximum concrete capacity is 28mm when using a tungsten-carbide-tipped bit. :contentReference[oaicite:3]{index=3}
The three modes are hammering, hammering with rotation and rotation-only operation. :contentReference[oaicite:4]{index=4}
The HR2810 is designed for SDS-PLUS bits. :contentReference[oaicite:5]{index=5}
The no-load speed is 0–1,100rpm. :contentReference[oaicite:6]{index=6}
The impact rate is 0–4,500 impacts per minute. :contentReference[oaicite:7]{index=7}
Makita specifies 2.8J according to EPTA Procedure 05/2009; some Makita product material also states 2.9J under its experimental conditions. :contentReference[oaicite:8]{index=8}
The specified capacity is 13mm in steel and 32mm in wood. :contentReference[oaicite:9]{index=9}
Yes. The torque-limiting clutch is designed to disengage the gears if the bit binds, helping reduce gear damage. :contentReference[oaicite:10]{index=10}
Yes. Manufacturer documentation identifies variable speed control and reversing functionality. :contentReference[oaicite:11]{index=11}
Manufacturer documentation lists a side grip and depth gauge as standard accessories. The bit is not included. :contentReference[oaicite:12]{index=12}
Weight varies by regional specification. Makita India lists 3.4–3.8kg, while the supplied Saudi/AP configuration specifies 3.2kg. :contentReference[oaicite:13]{index=13}
Its concrete drilling, hammer drilling and chiselling capabilities make it suitable for applicable construction and renovation tasks within its specified capacities. :contentReference[oaicite:14]{index=14}
Yes, this product is available for B2B and project procurement purchasing.