MSA V-Gard® Visor Frame with Debris Control for Slotted Helmets, 10115730
MSA V-Gard® Visor Frame with Debris Control for Slotted Helmets, 10115730
Inclusive of 15% VAT
The MSA V-Gard® 10115730 is a standard visor frame designed for use with MSA slotted safety helmets. It features a sloped design that helps materials slide off the frame and a replaceable debris control that creates a tight seal between the frame and helmet. The non-metal construction makes the frame suitable for applications where electrical considerations are important. The frame uses a 3-point visor loading system for quick visor installation and removal and can be used with compatible earmuffs and respirators.
◈ Standard V-Gard® visor frame for MSA slotted helmets
◈ Includes debris control for a tighter helmet-to-frame seal
◈ Sloped frame design helps material slide away from the frame
◈ 3-point visor loading for quick fitting and removal
◈ Non-metal construction
◈ Compatible with earmuffs and many half-mask respirators
Technical Specifications
What’s in the Box
- MSA V-Gard® Visor Frame with Debris Control 1
Delivery Information
Everything you need to know about dispatch, coverage and B2B ordering before you check out.
Dispatch & transit
Delivery takes 1–2 business days within Dammam and 2–4 business days for all other regions across Saudi Arabia.
Free over 1000 SRCoverage
All 13 regions incl. Riyadh, Jeddah, Dammam, Makkah, Madinah, NEOM & Qiddiya project sites.
Site delivery availableB2B terms
VAT invoice issued on every order. Purchase-order & pay-on-invoice available for approved accounts.
PO accepted
You may also like
Frequently Asked Questions
Answers to common questions about this Product.
The MSA V-Gard 10115730 is a standard visor frame with debris control designed for MSA slotted safety helmets.
It is used to mount compatible V-Gard face protection visors onto MSA slotted safety helmets.
No. MSA identifies 10115730 as the frame with debris control and specifies it as being supplied without the visor.
It is designed for MSA slotted safety helmets.
Yes. It includes debris control designed to create a tight seal between the helmet and frame.
The debris control helps create a tighter seal between the helmet and visor frame, helping limit gaps around the frame.
The standard V-Gard frame is designed for MSA slotted helmets.
Yes. MSA states that V-Gard frames can be used with or without earmuffs.
MSA states that V-Gard frames are compatible with many half-mask respirators.
No. MSA specifies non-metal construction for V-Gard frames.
The sloped design allows material to slide off the frame rather than accumulating on it.
MSA's V-Gard frame uses a 3-point visor loading system designed for quick fitting and removal.
MSA specifies the frame colour as black.
MSA specifies approximately 196 mm length, 299 mm width and 85 mm height.
MSA specifies a weight of approximately 0.150 kg.
No. The frame is supplied separately from the compatible visor.
MSA describes V-Gard frames as having non-metal construction for use in electrical applications. The complete face-protection assembly and worksite requirements should be evaluated for the specific application.
Businesses can contact Burj Al Tiqniah (BAT) regarding bulk quantities and project procurement requirements.
Yes. Burj Al Tiqniah (BAT) can support business and bulk procurement enquiries for this product.